Morse below-hook drum carrier
for steel or plastic drum
Model 185A-HDPS

Heavy-Duty Below-Hook Drum Carrier

 Features, Options and Accessories

  FEATURES

Morse Model 185A-HDPS heavy-duty below-hook drum carrier allows you to lift, move and pour a steel or plastic drum weighing up to 900 Lb., or a half-full* drum up to 450 Lb. Standard Model 185A-HDPS heavy-duty below-hook drum carrier is designed to handle a 55-gallon steel or plastic drum.

• Capacity: 900 Lb.

• Handle: 55-gallon steel or plastic drum 31" to 37" tall

• Accepts Diameter Adaptors for smaller diameter drum

To load your drum into this below-hook drum carrier, tilt the drum slightly and slide the bottom bracket under the drum. Then move the drum holder against the drum and cinch the chain around the drum. Lift the drum carrier with your hoist or crane and rotate drum 360 degrees in either direction. The drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' chain loop.

IMPORTANT - It is critical to use the correct holder to lift your specific drum type and dimensions.

• To handle a fiber drum, use the correct size Diameter Adaptor

  CUSTOM VERSIONS

Model #

Description of below-hook drum carrier

Longer arms on frame to provide clearance for taller drum, or to allow use of Morse Drum Cones for controlled pouring

Frame and drum holder made of type 304 stainless steel

Painted with USDA approved white epoxy

Unit with "nested" lifting point to reduce required head room

Unit with wider frame and drum holder for larger diameter drum

Custom Diameter Adaptor for other sizes or types of drum