• REQUEST QUOTE
• SPEC SHEET
• PARTS DIAGRAMS /
  OPERATOR'S MANUAL
• LARGER IMAGES

Heavy-Duty Below-Hook Drum Carrier with 3-piece drum holder

3-Piece drum holder of model 185G-HD is designed for 22.5" (57 cm) diameter ribbed
55-gallon steel drum (208 liter steel drum).

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

This below-hook drum lifter complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test

Recommended Options

• MORStop Tilt-Brake
  
• Gear covers
• Counterweight

Asymmetric drum cones can be used with
below-hook drum carriers

Heavy-Duty Kontrol-Karrier
with 3-Piece Drum Holder and 1500 Lb. Capacity

Morse Model 185G-HD

(680 kg Capacity)

Morse Model 185G-HD heavy-duty below-hook drum carrier with 3-Piece Drum Holder allows you to lift, move and pour a drum weighing up to 1500 Lb. (680 kg), or a half-full* drum up to 800 Lb. (363 kg). Model 185G-HD is designed to handle a 55-gallon steel drum (208 liter steel drum) with 22.5" (57 cm) outside diameter between the ribs.

• Capacity: 1500 Lb. (680 kg)
• Handles: Ribbed 22.5" (57 cm) diameter
  55-gallon steel drum (208 liter steel drum)
• Has 3-Piece Drum Holder

The Key Feature of Model 185G-HD is its 3-Piece Drum Holder. This 8" wide metal band is hinged in two places and has a front closure to secure the drum. It replaces the cinch chain and ratchet tightner.

To load the drum lifter, simply move the drum holder against the drum and latch the closure on the 3-piece drum holder. The drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' chain loop. Lift drum and rotate drum 360 degrees in either direction.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop Tilt-Brake (option # 3900i-P), braking is immediate and automatic.

Ship weight: 103 Lb. (47 kg)
Ship dimensions: L40" W10" H39" (102 x 25 x 99 cm)

IMPORTANT - It is critical to use a model with the correct drum holder to lift your drum type and dimensions.

* Half-Full Drum Rating