morse logo
The Specialist In Drum Handling Equipment                                   Phone: (315) 437 - 8475   Fax: (315) 437 - 1029

Drum Pumps to Dispense from your 55-Gallon Drum
Barrel Pumps

Morse Manual Drum / Barrel Hand Pumps
55-Gallon Hand Drum Pumps

Morse drum hand pump - 55-gallon barrel pumps

Morse drum hand pump - 55 gallon barrel pumps
55-gallon drum hand pumps
and barrel pumps

bung adaptor for plastic drum
Buttress Adapters for plastic drums
are available through other sources to
thread a Morse drum pump to the
opening on your plastic drum

Double-action piston manual drum / barrel pumps are self priming, delivering on both the forward and the back stroke. It takes less than 5 cycles to yield a gallon (3.8 liters).

Each Morse 55-gallon drum / barrel hand pump is made in the same style and has the same action. They vary only in their materials of construction, consisting of specific polymers and elastomers for resistance to certain types of chemicals (please refer to the drum pump chart below).

Morse hand drum pumps - barrel pumps

Morse 55-gallon manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart on complete forward and backward cycle at 10 psi over 24 feet. They fit the NPT (National Pipe Thread) of the 2" bung on 55-gallon steel drum. Adaptors are available to use Morse 55-gallon barrel pumps with the buttress thread of the 2" bung on your plastic barrels.  

  • Suction lift tested for 15 feet minimum
  • Discharge head up to 25 feet
  • Output head pressure is up to 10.83 psi
  • 1" NPT suction tube
  • 3/4" NPT discharge tube
  • Two position drum pump handle
    • Handle can be mounted above the drum hand pump extending 20.5" above the bung when upright.

    • Mount handle below the drum hand pump for easier operation from below with the drum on a truck or platform.

  • Self-lubricating teflon piston ring operates wet or dry for long life
  • Chemically compatible with liquids up to 120° F (49° C)
  • Handle viscosity up to 2,000 SSU (about as thick as 30 weight motor oil at room temperature). Handle effort increases as viscosity approaches this maximum.
  • Models 26, 271-AE and 27-4AV drum / barrel pumps are generally useful with compatible liquids in a mild acidity/alkalinity range of pH 4 to 9. Avoid stronger acids and caustics.
  • Models 28-5BV and 28-6BE drum / barrel pumps are useful in a wider pH range.
  • Many other chemical characteristics effect choice of barrel pump (see drum pump chart below or chemical compatibility for specific fluids)

~ ~ CAUTION ~ ~

  • Chemical compatibility of a drum or barrel pump should be checked for EACH LIQUID BY CHEMICAL NAME
    • No single drum pump can be universally chemical resistant
    • Barrel pumps available include flammable drum pump and oil drum pump
  • Some blends of chemicals may not be suitable for any of these drum pumps
  • Different barrel pump models may be necessary for various liquids
  • Final determination of suitability for use intended, or manner of use, is responsibility of the user. Consult Morse for advice on the correct barrel pump for specific liquids. Please furnish chemical names.
  • Chemicals may be hazardous. It is the user's responsibility to take appropriate safety and protective measures.
  Drum and Barrel Pumps  
Drum Pump Model # Construction
(All have some T316SS)		 O-Ring Material Gasket Material Hose
Material		 Suction Tube Compatible Liquids
(General Guide)		 Ship
Weight		 Ship
Dimensions
26 polyester viton cork-nitrile PVC polyester petroleum products,
lube oils*		 10 Lb.
(4.5 kg)		 L21" W9" H9"
(53 x 23 x 23 cm)
27-1AE polyester EPDM EPDM EPDM polyester methyl alcohol,
ethyl alcohol*		 10 Lb.
(4.5 kg)		 L21" W9" H9"
(53 x 23 x 23 cm)
27-4AV polyester viton viton cross linked polyeth. polyester some napthas*,
some aromatics*		 12 Lb.
(5.5 kg)		 L19" W19" H9"
(48 x 48 x 23 cm)
28-5BV ryton viton viton cross linked polyeth. teflon some chlorinated solvents, acids, aromatics, xylene* 12 Lb.
(5.5 kg)		 L19" W19" H9"
(48 x 48 x 23 cm)
28-6BE ryton EPDM EPDM EPDM teflon some acids, caustics,
ketones, acetates*		 11 Lb.
(5 kg)		 L21" W9" H9"
(53 x 23 x 23 cm)

Note about drum pump chemical compatibility* NOTE: General guide only. Final determination of suitability of barrel pump for intended use, or for manner of use, is responsibility of the user. Consult Morse for advice on drum pump for compatibility with a specific liquid if it is not shown here. Please furnish chemical names. Also see Chemical Compatibility information for Morse 55-gallon barrel pumps.

Chemicals may be hazardous. It is the user's responsibility to take appropriate safety and protective measures. Specifications subject to change without notice.

Last Updated: 07/12/10

 

Drum Pumps to Dispense 55-gallon Drums. Morse Drum Hand Pumps.