Below-hook drum carriers

Lift, move and pour a drum below-hook with your hoist or crane

Model 185A
below-the-hook
drum pourer

Below-Hook Drum Carrier VIDEO

Power-Tilt Drum Karrier Video

More than just a drum inverter or drum dumper...
...drum carriers for controlled drum dispensing

Lift, rotate and control the pour of your
drum with Morse drum carriers.

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

• Use the menu on the right to select the right Morse Kontrol-Karrier to lift and pour your drum(s)
• Power-Tilt Kontrol-Karriers add ergonomic power-tilt to below the hook drum tilters
• Drum Karriers for pouring within operator reach

Tilt drum 360° in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt-control options

• Standard drum tilt control is pull chain and chain wheel (shown above left)
• Available with optional hand crank drum tilt control
• Also available with 16" hand wheel drum tilt control

Morse below-the-hook drum lifters

Morse below-the-hook drum lifters (i.e. Models 85A, 185A, 90, 41, etc.) are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test

Last Updated: 01/12/10

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.