Heavy-Duty Below-Hook Drum Carrier with 3-Piece Drum Holder
Morse Model 185G-HD Heavy-Duty Kontrol-Karrier
|
|
Recommended Options |
 |
|
|
|
Gear covers |
|
|
Counterweight
|
|
|
|
|
Custom Versions |
|
|
|
FEATURES
Morse
Model 185G-HD heavy-duty below-hook drum carrier with 3-Piece Drum
Holder allows you to lift, move
and pour a drum
weighing up to 1500 Lb., or a half-full* drum up to
800 Lb. Model 185G-HD is designed to handle a 55-gallon
steel drum with 22.5" outside diameter between the ribs.
-
Capacity: 1500 Lb.
-
Handles: 55-gallon steel drum
-
3-Piece drum holder
The KEY FEATURE
of Model 185G-HD is its 3-Piece Drum Holder. This 8" wide metal
band is hinged in two places and has a front closure to secure
the drum. It replaces the cinch chain and ratchet tightner.
|
To load
the drum lifter,
simply move the drum holder against the drum and latch the closure on
the 3-piece drum holder. Lift drum and
rotate drum 360 degrees in either direction. The drum can be held at any
tilt angle.
The standard drum tilt control is a chain wheel with 12' chain loop.
 IMPORTANT - It is critical to use the correct holder to lift your drum type
and dimensions. Model 185G-HD is designed only for steel drum with
22.5" outside diameter between the ribs.
|
|
|
ACCESSORIES
|
Model #
|
Description
|
|
|
471-P |
Counterweight to level unit without drum
|
|
|
CUSTOM VERSIONS
|
Model #
|
Description of below-hook drum carrier
|
|
|
185S-HD |
3-Piece drum holder for a smaller fixed diameter
|
Longer arms on frame to provide clearance for taller
drum, or to allow use of Morse Drum Cones
for controlled pouring
|
|
|
Painted with USDA approved white epoxy
|
Unit with "nested" lifting point to reduce required head
room
|
Unit with wider frame and drum holder for larger diameter
drum
|
* Half-Full Drum Rating for below-hook
drum carrier is an indication of capacity for tilting unbalanced,
bottom-heavy drum. Partially full drum with unbalanced and shifting load
is harder to tilt than full drum.
|
|
|
