Drum Rollers - Portable Drum Rotators
Drum Mixers

Roll a closed drum to mix and blend the contents
with the Morse industrial drum mixers

Compact, portable industrial drum mixer and drain stand rolls closed drum to agitate the contents.

Mixing in a sealed drum eliminates worker exposure and reduces clean-up.

• Portable drum mixers agitate and blend drum contents without opening the drum! 
• Utilize important ingredients that would otherwise be in unmixed sediment
• Eliminate the hazards and clean-up of messy transfer of contents
• Roll a drum
  • 6" to 28" in diameter
  • Up to 40" tall
    Note: The tipping lever will only engage a drum 30" or taller
• Capacity varies with model number
  (see Drum Rotator Chart)
  • 500 Lb. Liquid Load
  • Up to 400 Lb. Dry Load. A shifting dry load exerts greater stress on the drum rotator.
• Specify choice of drum RPM and motor type when ordering (see chart below)
• Dimensions
  • Stands just 19.25" tall when rolling a drum, making loading and unloading easier.
  • Measures 21" wide x 34.75" long with drum in rolling position.
• Built-in retractable tipping lever to assist loading (shown left)
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive
• Available motor options
  • Single or 3 phase electric 55-gallon drum mixers
  • Explosion proof
  • Air powered (Air Motor Technical Information)

Fixed-Speed Portable Drum Rollers

Choose a portable drum roller to rotate drum at single speed of 10, 20 or 30 RPM

Variable-Speed Portable Drum Rollers

Portable drum rollers with a transmission that allows you to vary drum speed from 10 to 24 RPM

• Ideal for experimental use

• Some users prefer fast initial drum rolling, then reduced speed for continued, gentle agitation

Belted Portable Drum Roller for Fiber Drum

The belted drum rollers have a pair of belts between the rollers to turn drum (instead of 2 rows of wheels). Belts allow it to roll a fiber drum weighing up to 300 Lb. without damaging the fiber sidewall.

Belted portable drum rollers are available with same drum speed and motor types.

Options

Option # 1-5P Idler Attachment to Roll a 1 to 5 Gallon Can

• Extends usefulness of rotator to roll 1 to 5 gallon cylindrical cans
• Comes complete with adjustable spacers and mounts
• This option is for 201 and 201VS portable drum rollers
• Not for 201B series belted drum rollers
• Also see 5-Gallon Can Tumblers designed specifically to tumble 1 to 5 gallon cans / pails end over end to more vigorously mix the contents

Option # POLY-201 to Roll a Plastic Drum

Plastic drums are soft-sided and lack the ridged ribs and rims of a steel drum. They require special features to position them on the drum roller, and to prevent them from traveling lengthways during rotation.

This option includes

• Three extra wheels on each side support your plastic drum. The weight is then distributed over a total of 14 wheels.
• End stop to prevent a plastic drum from traveling lengthways while being rolled.
• Chain to latch around the top of the drum while tipping from upright to horizontal rolling position on the drum rotator. The chain should then be released during drum rolling.

Option # POLY-201
Order this option factory installed on your new portable drum roller.

Option # POLY-201FI
Kit for field installation to roll a plastic drum on your existing portable drum roller.

Option # 201-CAGE   Enclosure with Safety Interlock

Place your drum roller into the cage and close it to begin rolling. When the cage is opened, the drum roller is automatically shut off.

Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.