Drum Tumblers - Drum Rotators

End-Over-End Drum Rotators tumble a drum to mix and blend the contents. Turning drum End-Over-End with a drum tumbler provides a more aggressive mixing action.
 

Morse drum tumblers turn your sealed 55-gallon drum end-over end to mix separated ingredients back into suspension right inside.

Drum Tumbler
Video

Each 300 Series Drum Tumbler is shipped with a Model 41 Drum Lifting Hook
shown lowering drum
into holder.

Drum is secured in the drum holder with 2 load binders

Drum Tumblers Save Time, Labor and Money!

Drum tumbling provides thorough mixing action to:

• Blend valuable ingredients back into suspension

• Leave less residue in drum to reduce waste and ease drum cleaning

• Eliminate transfer and reduce clean-up

Load drum with your hoist or crane and the Model 41 Drum Hook provided.

Drum Tumbler Features:

• Drum rotation: 13 RPM

• Handle: 55-gallon steel (210 liter) drum

• Capacity: 800 Lb. (363 kg) per drum

• Shipped with Model 41 Drum Hook to assist in placing drum into holder with your crane or hoist

• Standard motors are 230V, 3-Phase, 60 Hz (50 Hz also available)

• Standard electric control includes start, stop and jog functions

• Other motor voltages, explosion proof, and air motors are available

• Sturdy frame built to resist stress and shock of tumbling load

Drum Tumbler Applications

• Mix dry powders, wet grains, dyes, fine and coarse granules, settled liquids and powders with these drum tumblers

• Ideal for mixing or agitating highly viscous substances inside closed drum

Note: To rotate fiber or plastic drum end-over-end, order custom 300 Series with 310 style drum holder or order 310 Series Tilt-To-Load Drum Rotator

Optional Equipment for Drum Tumblers

Model 300LC
Load Crane

Load Crane for self-contained loading capability has a short piece of alloy lifting-chain with a connector to attach the Drum Lifting Hook. The Load Crane uses the Drum Lifting Hook to engage a horizontal drum. The lifting range and pivot travel of the Load Crane enables lifting a horizontal drum from floor in front of the drum tumbler up to and into one drum-holder of the drum tumbler, and back again.
 

Load Cranes with New Drum Rotators

Order ONE load crane with single drum tumbler. Order TWO load cranes with 2-300 series double drum tumbler.

• Model 300LC - Load Crane welded to right side of end-over-end drum rotator.

• Model 300LCL - Load Crane welded to left side of double end-over-end drum rotator.

Load Cranes for Field Installation

• Model 300LCF - Load Crane for field installation. Bolt to right side of your end-over-end drum rotator.

• Model 300LCFL - Load Crane for field installation. Bolt to left side of your double end-over-end drum rotator.

The Load Crane assists in loading a drum into the tumbler for those without a hoist over the machine. A more ergonomic solution for the same application is provided by the Tilt-to-Load Drum Tumblers with power lift of an upright drum from floor level.

Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.

Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G.

Models are available with 50 Hz motors, however, expect a 20% reduction in drum RPM.

Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. Air Motor Technical Information

• Filter, regulator and lubricator (FRL) may be ordered from Morse

  • Part # 90010-P   Description: KIT, 1/4" FRL & VALVE 

  • Part # 90020-P   Description: KIT, 3/8" FRL & VALVE

Last Updated: 04/09/08

Drum Tumblers - End-Over-End Drum Rotators tumble drum to mix and blend contents of closed drum.