|
Tilt-To-Load Drum Rotator |
|
310 Series drum rotators |
|
|
back to product page
Drum
Tumbler VIDEO |
Morse 310 Series Tilt-To-Load Drum Rotator tumbles a
drum "corner-over-corner" for vigorous mixing of drum
contents. |
The drum holder accepts steel, plastic or fiber
drum 29" to 37" tall with 18" to 23.5" diameter.
It securely holds the drum on bottom support plate with a
cinch chain around drum and two top clamps.
Drum rotation speed is variable from 5 to 20 RPM. Capacity: 800 Lb. (363 kg)
full drum. 400 Lb. (181 kg)
half-full drum*
|
Enclosure with safety interlock
automatically shuts of the drum tumbler when the door is
opened. It has an opening to provide access to the RAISE and
ROTATE controls.
Outside post-to-post Dimensions: L88” x W52” x H74” |
 Install Morse Rotators in accordance with OSHA requirements
for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart
O.1910.212 "General Requirements for all Machines." Power
connections and motor controls must comply with applicable codes. |
| |
* Half-full Capacity is an indication
of the capacity for tilting an unbalanced, bottom-heavy
drum. A partially full drum with an unbalanced and shifting
load is harder to tilt than a full drum.
Tilt-To-Load Drum Rotator - Morse 310 Series
Tilt-To-Load Drum Rotator
Last Updated:
07/08/08
|
