morse logo
Phone: (315) 437 - 8475
Fax: (315) 437 - 1029

You are here: products : Hydra-Lift Drum Karriers : Air power lift and tilt option

Hydra-lift drum carrier with 96" air power lift and tilt
Model 400A-96-114

Lift heights available on Morse drum dumpers
Maximum lift height is
measured from the floor
to the lowest point of
a horizontal 55-gallon
steel drum.

Air Power Lift and Tilt
Hydra-Lift Drum Karriers

These ergonomic drum handlers have air powered lift and tilt. Option 114 allows you to easily lift and pour a heavy drum. Simply attach to your plant airline, and you are ready to lift and pour a 55-gallon steel drum weighing up to 800 Lb.

Option 114 Air Motor Power-Lift and Power-Tilt

  • Air motor powered hydraulic lift and tilt
  • Separate handles to control drum lift and tilt
  • Third handle controls lowering
  • Vane type air motor requires 40 psi at 40 scfm. Do NOT exceed 60 psi. See Air Motor Technical Info.
  • Filter, regulator, lubricator and valve (FRL) are available at extra cost.
    • Part # 3869i-P is FRL option on new unit.
    • Part # 3869-P is FRL Kit for field installation on unit with serial # 0802 or later.
    • Part # 90020-P is FRL Kit for field installation on unit with serial # 0702 or earlier.

It's a Cinch to handle almost any drum, with the
MORcinch Drum Holder

Drum Handling System


  • Automatically cinches for 22" to 23.5" (56 to 59.7 cm) diameter steel or fiber drum
  • Accepts MORcinch Options to handle your plastic drum
  • Accepts Diameter Adaptors for your smaller drums
  • Flexible chain cover helps protect the drum sidewall
  • Includes safety covered gears for your protection
  • Has durable stress-relief weld joints for years of service

Available in 3 different lift heights

Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon steel drum. Hydra-Lift drum dumpers are available with 96", 72" or 60" maximum lift height.

Model # Lift Height Tilt Control
400A-96-114 96" Chain wheel and pull chain
400A-72-114 72" Chain wheel and pull chain
400A-60-114 60" Hand Crank

Models with Spark resistant parts

Spark resistant parts reduce the possibility of mechanical sparks as a possible source of ignition.

400AM-96-114 96" Chain wheel and pull chain
400AM-72-114 72" Chain wheel and pull chain
400AM-60-114 60" Hand Crank

Air Power Lift and Tilt - Option 114

Controls for air power lift and tilt - Option 114

Controls for Option # 114 Air Power-Lift and Power-Tilt

  1. Hold lever to activate LIFT and TILT controls
  2. Control to TILT drum
  3. Control to LIFT drum
  4. Control to LOWER drum
 

Last Updated: 02/24/10

 

Air powered lift and tilt option provides an ergonomic method to lift and control dispensing of your drum.