morse logo
Phone: (315) 437 - 8475
Fax: (315) 437 - 1029

You are here: products : Hydra-Lift Drum Karriers : Air power lift option

Hydra-Lift drum carrier with air power lift - Model 400A-72-124

Four year old Ben
can lift an 800 Lb. drum
with Model 400A-72-124

Lift heights available on Morse drum dumpers
Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon steel drum.

Air Power Lift
Hydra-Lift Drum Karriers

Request Quote

Morse ergonomic air powered lift option provides an ergonomic method to lift and control pour of a drum. Simply attach to your plant airline, and you are ready to lift and pour a 55-gallon steel drum weighing up to 800 Lb.

This option retains manual tilt control of the drum with hand crank or chain wheel and pull chain. See manual tilt control options below.

Option 124 Air Motor Power- Lift with Manual-Tilt

  • Air motor powered hydraulic lift
  • Power lift makes drum handling easier and faster
  • Handle to control drum lift
  • Vane type air motor requires 40 psi at 40 scfm. Do NOT exceed 60 psi. Air Motor Technical Info
  • Filter, regulator, lubricator and valve (FRL) are available at extra cost
    • Part # 3869i-P is FRL option on new unit.
    • Part # 3869-P is FRL Kit for field installation on unit with serial # 0802 or later.
    • Part # 90020-P is FRL Kit for field installation on unit with serial # 0702 or earlier.

It's a Cinch to handle almost any drum, with the
MORcinch Drum Holder

Drum Handling System


  • Automatically cinches for 22" to 23.5" (56 to 59.7 cm) diameter steel or fiber drum
  • Accepts MORcinch Options to handle your plastic drum
  • Accepts Diameter Adaptors for your smaller drums
  • Flexible chain cover helps protect the drum sidewall
  • Includes safety covered gears for your protection
  • Has durable stress-relief weld joints for years of service

Available in 3 different lift heights

Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon steel drum. Hydra-Lift drum dumpers are available with 96", 72" or 60" maximum lift height.

Model # Lift Height Tilt Control
400A-96-124 96" Chain wheel and pull chain
400A-72-124 72" Chain wheel and pull chain
400A-60-124 60" Hand crank

Models with Spark Resistant Parts

Spark resistant parts reduce the possibility of mechanical sparks as a possible source of ignition.
Model # Lift Height Tilt Control
400AM-96-124 96" Chain wheel and pull chain
400AM-72-124 72" Chain wheel and pull chain
400AM-60-124 60" Hand crank

Air Power Lift - Option 124
Controls for air power lift - Option 124

Control for Option # 124 Air Power-Lift

  1. Hold lever to LIFT drum
  2. Handle to LOWER drum

Convert existing manual lift model Air power lift

  • Order # O-124FI power lift option for "Field Installation"

Manual Tilt Control Options
MORStop Tilt-Brake prevents back drive from an unbalanced drum
  • Option # X01 - Hand crank and MORStop Tilt-Brake
  • Option # X02 - Hand crank
  • Option # X03 - Hand wheel

Last Updated: 02/24/10

Air powered lift option provides an ergonomic method to lift and control dispensing of your drum.