Phone:  (315) 437 - 8475
Fax:  (315) 437 - 1029

You are here: products : Hydra-Lift Drum Karriers : Battery power lift option

Request for quote on drum carrier with battery power lift - Option 125
spec sheet - link
parts diagram - link

Hydra-Lift drum carrier with battery power lift - Option 125

Model 400A-96-125
Hydra-Lift drum carrier
with 96" lift height
and battery power lift

Lift heights available on Morse drum dumpers
Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon steel drum.

Battery Power Lift
Hydra-Lift Drum Karriers

Request Quote
 

Morse Hydra-Lift drum carriers with battery powered lift option provide an ergonomic method to lift and control pouring of your drum. Charge the on-board 12V deep cycle battery with the separate charger supplied, and use the drum carrier with no need to plug into power or air line.
 
This option retains manual tilt control of the drum with hand crank or chain wheel and pull chain. See manual tilt control options below.
 
Battery powered models are NOT for use in areas classified as hazardous.

Option 125 Battery Power-Lift with Manual-Tilt.
  • 12V Deep cycle battery provides self contained power
  • Charger included for wall or shelf mount
  • Handle to control drum lift

Available in 3 different lift heights

Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon steel drum. Hydra-Lift drum dumpers are available with 96", 72" or 60" maximum lift height.
Model # Lift Height Tilt Control
400A-96-125 96"
Chain wheel and pull chain
400A-72-125 72"
Chain wheel and pull chain
400A-60-125 60"
Hand crank

Battery Power Lift - Option 125

Control for battery power lift - Option 125

Control for Option # 125 Battery Power-Lift

There is a single handle to control LIFT and LOWER of the drum.

 

Existing manual lift models can be converted to power lift

  • Order # O-125FI Battery power lift option for "Field Installation"

Manual Tilt Control Options parts diagram - link

MORStop Tilt-Brake prevents back drive from an unbalanced drum
  • Option # X01 - Hand crank, MORStop Tilt-Brake and Gear Covers
  • Option # X02 - Hand crank and Gear Covers
  • Option # X03 - Hand wheel and Gear Covers

Request For Quote on Hydra-Lift Drum Karrier with Option 125

Request a quote from your local Morse dealer.

Your Morse Dealer
Lift Height Required 96"   72"    60"
Handle Plastic Drum  Steel Drum  Fiber Drum

Your contact information. . .  * Required field

* Name
* Company
* Zip Code
Country (if not USA)
* Phone
* Email (We reply to EXACT Email you enter)
 
Last Updated: 04/09/08
 
Battery powered lift option provides an ergonomic method to lift and control dispensing of your drum.
Technical Support and Dealer Referrals
Monday through Friday 8:00 a.m. to 4:30 p.m. (EST)
Morse Mfg. Co., Inc.
727 West Manlius St., PO Box 518
East Syracuse, NY 13057 U.S.A.
Phone: (315) 437-8475
Fax: (315) 437-1029

| drum handling equipment | parts diagrams and operators manuals | catalog and spec sheets |
| request quote | contact Morse | custom drum handlers | company directory |
| warrantyprivacy policy | site map | drum handling videos |

Copyright © 1998-2008  -  Morse Mfg. Co., Inc. All rights reserved. "The Specialist In Drum Handling Equipment" ®