morse logo
Phone: (315) 437 - 8475
Fax: (315) 437 - 1029

You are here: Products : Hydra-Lift Drum Karriers : Drum dumpers with manual lift and tilt option

Hydra-Lift drum dumper
Model 400A-72 drum dumper

Lift heights available on Morse drum dumpers
Maximum lift height of
drum dumper is measured
from the floor to the
lowest point of a horizontal
55-gallon steel drum.

Manual Lift and Tilt Drum Dumpers
Hydra-Lift Drum Karriers

Morse Hydra-Lift Karriers enable you to lift and control pouring of your heavy drums.

Capacity:

Standard Manual-Lift and Manual-Tilt Controls

Drum Dumpers are available in 3 different lift heights

Hydra-Lift drum dumpers are available with 96", 72" or 60" maximum lift height, measured from the floor to the lowest point of a horizontal 55-gallon steel drum.

Each stroke of the pump handle gives 1/2" of cylinder lift, taking approximately 43 strokes of the pump handle to raise the drum fully on model 400A-60 with 60" lift height.

It's a Cinch to handle almost any drum, with the
MORcinch Drum Holder

Drum Handling System


  • Automatically cinches for 22" to 23.5" (56 to 59.7 cm) diameter steel or fiber drum
  • Accepts MORcinch Options to handle your plastic drum
  • Accepts Diameter Adaptors for your smaller drums
  • Flexible chain cover helps protect the drum sidewall
  • Includes safety covered gears for your protection
  • Has durable stress-relief weld joints for years of service
Model # Lift Height Tilt Control
400A-96 96" Chain wheel and pull chain
400A-72 72" Chain wheel and pull chain
400A-60 60" Hand crank

Drum Dumpers with Spark Resistant Parts

Spark resistant parts reduce the possibility of mechanical sparks as a possible source of ignition.
Model # Lift Height Tilt Control
400AM-96 96" Chain wheel and pull chain
400AM-72 72" Chain wheel and pull chain
400AM-60 60" Hand crank

Manual Lift Control

  

Hand pump to control lift and lower of drum

Hand pump for drum lift

  1. Pump handle to LIFT drum
  2. Release valve to LOWER drum

Standard Manual Tilt Controls

  
Chain wheel for drum tilt control on hydra-lift drum dumpers

Drum tilt control on manual tilt drum dumpers

 

Chain wheel and pull chain
on 96" and 72" drum dumpers.

 

 Hand crank drum tilt control on hydra-lift drum dumper
Hand crank
on 60" drum dumpers.
Manual Tilt Control Options to pour drum ( factory installed on new drum dumpers )  

MORStop Tilt-Brake prevents back drive from an unbalanced drum
MORStop Tilt-Brake Option
provides greater safety
 on Morse drum dumpers
  • Option # X01 - Hand crank and MORStop Tilt-Brake
  • Option # X02 - Hand crank
  • Option # X03 - Hand wheel

Convert existing Manual Lift Drum Dumpers to Power Lift

  
Power Lift Kits for field installation
Printable Sheet of kits
for field installation on your Morse drum dumper

Add the ease and ergonomic advantage of Power-Lift to your Morse Hydra-Lift Karrier. These "Field Installation" kits are available to convert your manual lift drum dumper to power lift.

To Convert your manual lift drum dumper to Power-Lift
Power-Lift Kits for Field Installation
Drum Dumper Model # AC
Power Lift		 DC
Power Lift		 Air
Power Lift
400A-72 or 400A-60 120FI-72 125FI-72 124FI-72
400A-96 120FI-96 125FI-96 124FI-96

* Half-Full Drum Rating of Drum Dumpers

Half-full rating of drum dumpers is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Last Updated: 02/24/10

Morse manual lift and tilt Hydra-Lift drum dumpers enable you to lift and control pouring of your heavy drums.