Drum Racker
Video 4.0mb

Model 405-114 (shown) is Omni-Lift Drum Racker with Air Power Lift and Tilt

Model 405-114
Omni-Lift Drum Racker with Air Power Lift and Tilt

Drum Rackers / Drum Stackers
on wheels to place a drum horizontally in rack

Morse 405 Series
Omni-Lift Karriers ^TM  (Patented)

Morse 405 Series Omni-Lift Drum Rackers enable you to rack drums up to 72" high. They are easily handled by one person. Lift a drum from either horizontal or vertical position on the floor. Please see the typical rack configuration served by the Omni-Lift Drum Rackers.

Ergonomic power lift and power tilt options available with your choice of Air, AC or DC motors. Move drum racker easily on two 8" wheels and two 4" casters.

Capacity

• 800 Lb. for full drum

• 500 Lb. for half-full drum*

Handle 55-gallon steel drum. To handle a
55-gallon plastic drum, add option AP405.

Omni-Lift Drum Rackers can also serve as a dumper with controlled pouring (shown left).

Also available with spark resistant parts as 405M Series (see chart below)

 Place drum onto a drum rotator with an Omni-Lift Drum Racker

Lift your drum from horizontal or from vertical with Omni-Lift Drum Rackers

Load Morse Drum Rotators

• Place drums onto a Stationary Drum Rotator (shown left)

• Or onto Portable Drum Rollers

Rack 55-gallon Plastic Drum with option # AP405

Option # AP405 

• Adapt 405 Series for handling your closed head 55-gallon plastic drum with top rim

• You can also rack 55-gallon steel drum with option AP405 installed

• Not for use with spark resistant 405M Series

* Half-full drum rating

Half-full drum rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Last Updated: 04/09/08