Drum Rotating Video

2.8mb  8.2mb

Model 1-5154VS-1 for rotating a single Drum has Variable Speed control from 10 to 40 RPM and single phase electric motor.

Features

Drum rotating speed

• Choose fixed drum rotating speed of 10, 20 or 30 RPM. The 20 RPM speed is good for most liquids and is furnished if RPM is not specified.

• Variable speed models provide drum rotating from 10 to 40 RPM. Speed is regulated easily by turning a knob.

Four drive and four idler wheels per drum

Capacity: See Drum Rotator Chart

• Spills and splashing of dangerous contents on workers

• Risk of contamination

• Transfer and clean-up

• Special vessels and apparatus

Options

for Option POLY-1-5154

Option to roll a 55-gallon plastic drum

has extra wheels to support a flexible soft sided 55-gallon plastic drum which lacks ribs or roll rings. It also includes end stops to prevent plastic drum from traveling lengthways while being rolled.

• Option # POLY-1-5154 for single drum roller

• Option # POLY-2-5154 for double drum roller

Option to roll a 1 to 5 gallon can

extends the usefulness of the rotator to roll 1 to 5 gallon cylindrical cans and pails. It comes complete with adjustable spacers and mounts.

• Option # 1-5-1 Idler Attachment

See also: Can Tumblers designed to rotate 1 to 5 gallon cans end-over-end

Single Drum Rollers

• Roll a steel drum 6” to 28” diameter and up to 40” long

• 1/2 HP motor drives efficient worm gear reducer connected to solid 1" (2.54 cm) diameter shaft to turn four 6" (15 cm) diameter Neoprene drive wheels

• Base dimensions: 24" x 55" (61 cm x 140 cm)

• Capacity: see Drum Rotator Chart

Variable Speed Drum Rotators (not shown)

• Similar to model 1-5154, but transmission allows user to vary drum speed from 10 to 40 RPM

• Ideal for experimental use

• Some users prefer fast initial rolling and reduced speed for continued, gentle agitation

• Handles same drum weights at corresponding speeds as fixed speed models

Double Drum Rollers have twice the capacity

• Roll one or two steel drums 6” to 28” diameter and up to 36” long

• Heavy-duty 1 HP motor drives efficient gear reducer connected to 1" diameter shaft operating eight 6" (15.2 cm) diameter Neoprene drive wheels

• Speed choices same as 1-5154 above

• Base dimensions: 24" x 97" (61 cm x 140 cm)

• Capacity: see Drum Rotator Chart

Double Variable Speed Drum Rotators (not shown)

• 1 HP, 60 Hz motor with variable speed gear reduction

• Handles same drum weights at corresponding speeds as fixed speed models

How To Order Stationary Drum Rotators

Single Stationary Drum Rotator, 20 RPM, Explosion Proof, Single Phase

Double Stationary Drum Rotator, Variable Speed, Air Motor

Standard Stationary Drum Rotators are shipped without control, cord and plug and must be installed by an electrician according to local codes and customer's preference.

Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G.

Models are also available with 50 Hz motors, however, expect a 20% reduction in drum RPM.

Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. Air Motor Technical Information

• Filter, regulator and lubricator (FRL) may be ordered from Morse

  • Part # 90010-P   Description: KIT, 1/4" FRL & VALVE

  • Part # 90020-P   Description: KIT, 3/8" FRL & VALVE

Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.

Last Updated: 04/09/08

Morse Drum Rotators - Drum Rollers. Rotating drums to mix or blend material inside a closed drum saves time, labor and money. Drum rotating mixes drum contents to ensure homogeneity with less hazards.