Options for MORcinch
Drum Handling System

Below-hook drum carrier with
Top Rim Clamp Option for your rimmed
55-gallon drum (208 liter)

Below-hook drum carrier with Bracket Assembly Option needed for rimless plastic drum. Also recommended to more securely handle a fiber drum.

Below-hook drum carrier with Diameter Adaptor for smaller drum

Recommended
MORStop Tilt-Brake Option

Heavy-Duty Below-Hook Drum Carriers
1500 Lb. Capacity

(680 kg Capacity)

• Model 185A-HD
• Model 185AM-HD with spark resistant parts
• Model 185A-HDSS made of stainless steel

Morse Heavy-Duty Kontrol-Karriers lift, rotate and control the pour of a drum at or above your reach

Morse Heavy-Duty Kontrol-Karriers enable you to pour a drum above your reach. You control drum tilting 360° in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with a drum faucet in place.

These heavy-duty drum carriers have a pull chain to control the drum tilt with a 60:1 gear and sprocket ratio.

Capacity:

• Full drum up to 1500 Lb. (680 kg)
• Half-full drum* up to 800 Lb. (363 kg)

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Kontrol-Karriers with 1500 Lb. (680 kg) Capacity

Model 185A-HD has the MORcinch Drum Holder with cinch chain and ratchet mechanism to secure your drum in the drum holder.

Select Model #

Half-Full Drum Rating

* Half-Full Drum Rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Morse below-the-hook drum lifters

Morse below-the-hook drum lifters are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test

Last Updated: 01/25/10

Heavy-duty drum carriers with 1500 Lb. (680 kg) capacity to tilt and pour drum below-the-hook with your hoist or crane - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled drum dispensing.