Extra Heavy-Duty
3-piece drum holder
(part # 4511-P)

Morse Model 185XGR
Extra Heavy-Duty Drum Carrier
with 2500 Lb. Capacity

(1134 kg Capacity)

Below-Hook Extra Heavy-Duty Kontrol-Karrier
to control drum pouring

Morse Extra Heavy-Duty Kontrol-Karrier lift, rotate and control drum pouring at or above your reach

Morse Extra Heavy-Duty below-hook drum carrier enables drum pouring at or above your reach. You control drum tilting 360° in either direction. Dispense drum contents with your hoist or crane. Even lift and invert your drum with drum faucet in place.

This Extra Heavy-Duty drum carrier has a pull chain to control the drum tilt with a 150:1 worm gear speed reducer and "extra heavy-duty" rating.

Model 185XGR - Extra Heavy-Duty Below-Hook Drum Carrier with 2500 Lb. (1134 kg) capacity

Capacity:

• 2500 Lb. (1134 kg) Full 55-gallon steel drum (208 liter steel drum)
• 1250 Lb. (454 kg) Half-full drum* 55-gallon steel drum (208 liter steel drum)

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Option: Diameter Adaptor for 19" (48.3 cm) Diameter Drum

Model 185XGR accepts Diameter Adaptor model 55/30-19GR for a 19" (48.3 cm) diameter drum. The Diameter Adaptor simply lifts in and out of the drum holder, so you can handle a 55-gallon (208 liter) or a 30-gallon (113 liter) steel drum with the same unit.

Half-Full Drum Rating

* Half-Full Drum Rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Morse below-the-hook drum lifters

IMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

This below-hook drum lifter complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test

Last Updated: 01/25/10

Morse Extra Heavy-Duty Drum carrier with 2500 Lb. (1134 kg) capacity. Model 185XGR Below-Hook Extra Heavy-Duty Kontrol-Karrier to control drum pouring.