Phone:  (315) 437 - 8475
Fax:  (315) 437 - 1029

You are here: Below-Hook Drum Carriers : 800 Lb. Capacity

Morse Drum lifter / pourer - Model 185A
Model 185A
for pouring drums

Available with optional
MORStop Tilt-Brake



spec sheet - link

Below-Hook Drum Carriers

to lift and pour drums with your hoist or crane

choose below-hook drum lifterSelect Series

Kontrol-Karriers
pour above reach

below-hook drum carriers to pour drum above reach

800 Lb. Capacity

7 Models

1500 Lb. Capacity

4 Models

2000 Lb. Capacity

3 Models
2500 Lb. Capacity
1 Model
For Plastic Drum
1 Model

Power Tilt

9 Models

Drum Karriers
pour within reach

Drum-Karriers to pour within reach
6 Models
Adjusto-Karriers
for diameter range
Adjusto-Karrier
2 Models

 

800 Lb. Capacity

Morse Kontrol-Karriers lift, rotate and control the pour drum at or above your reach

Pouring drums above your reach is easy with Morse Kontrol-Karriers. They allow you to control drum tilting 360° in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place.
These below-hook drum carriers have a pull chain to control the drum tilt with a 30:1 gear and sprocket ratio for pouring drums.
Capacity:
  • Full drum up to 800 Lb. (363 kg)
  • Half-full drum* up to 500 Lb. (227 kg)

slect modelSelect Model #

Model # Description Handle
185i
Accepts Diameter Adaptors
55-gallon steel drum. Accepts Diameter Adaptors for smaller drum.
185i/E
Equipped with Fiber Drum Strap
 
55-gallon steel or fiber drum. Accepts Diameter Adaptors for smaller drum.
185A
 
55-gallon steel drum
185A/E
Equipped with Fiber Drum Strap
55-gallon steel or fiber drum
185G
Has 3-Piece Drum Holder
55-gallon steel drum
185AM
Has Spark Resistant Parts
55-gallon steel drum
185R
Has Top Rim Clamp
Rimmed steel, plastic or fiber drum up to 23.5" diameter, Minimum 34" tall
 

Half-Full Drum Rating

* Half-Full Drum Rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Morse below-the-hook drum lifters

Morse below-the-hook drum lifters are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test
Last Updated: 04/09/08
 
Below-Hook Drum Carriers for lifting and pouring drums with your hoist or crane. Drum carriers with 800 Lb. capacity to tilt and pour drum below-hook with hoist or crane.
Technical Support and Dealer Referrals
Monday through Friday 8:00 a.m. to 4:30 p.m. (EST)
Morse Mfg. Co., Inc.
727 West Manlius St., PO Box 518
East Syracuse, NY 13057 U.S.A.
Phone: (315) 437-8475
Fax: (315) 437-1029

| drum handling equipment | parts diagrams and operators manuals | catalog and spec sheets |
| request quote | contact Morse | custom drum handlers | company directory |
| warrantyprivacy policy | site map | drum handling videos |

Copyright © 1998-2008  -  Morse Mfg. Co., Inc. All rights reserved. "The Specialist In Drum Handling Equipment" ®