MORStak ^TM Drum Stacker will rack a drum with a drum faucet in place on the drum.

 Drum Racker / Drum Stacker
MORStak ^TM Drum Rackers Bring Ergonomics to Drum Racking

Rack your 55-gallon (208 liter) steel or plastic drum with top rim up to 8.5 feet (2.59 m) high! The material handling solution for safe, efficient drum racking.

Use this modern material handling equipment
with powered lift and tilt. Lift your drum, tilt it to horizontal and set it into your drum rack.

Model 620-115 MORStak ^TM Drum Racker shown has battery powered lift and tilt.

Safety conscious material handling:
The MORStak ^TM drum racker is your material handling solution for safety conscious, efficient and cost effective drum storage and retrieval. MORStak ^TM drum rackers replace unsafe "bare fork" handling of drums using large, expensive fork trucks.

Compact MORStak ^TM drum rackers provide an ergonomic safety conscious way to place drums into and retrieve them from your drum rack.

Handle your 55-gallon (208 liter) drum with a drum faucet in place - see diagram. This allows your drum rack to serve as a dispensing station. MORStak ^TM drum racker has 5" diameter front wheels to fit under the bottom shelf of your drum rack.

The MORStak ^TM drum racker arms fit easily into spaces below the curvature of a horizontal drum on your drum rack. This provides the most efficient use of drum storage space because drums can be racked side by side with virtually no space between them (see rack configuration).

MORStak ^TM Drum Rackers handle ONLY a 55-gallon (208 liter) steel or plastic drum with top rim, and maximum weight of 800 Lb. (363 kg). They will NOT handle a smaller drum or a drum without a top rim. They have a positive drum gripping mechanism that must be manually engaged before lifting an upright drum or tilting a drum from horizontal position. MORStak ^TM drum rackers will not allow you to tilt your drum without the clamp engaged.

• Rack your 55-gallon steel drum
• Rack your 55-gallon plastic drum with top rim when the included Drum Pads are installed (shown right). The Drum Pads are designed to support a flexible plastic drum.
  • Drum Pads are included with all MORStak ^TM Drum Rackers
  • When the Drum Pads are installed, it reduces maximum drum cradle width from 19" (48.25 cm) to 13" (33 cm) for racking a 55-gallon drum

Drum Pads are included with each MORStak ^TM Drum Racker. Install the drum pad kit to handle a 55-gallon plastic drum with top rim. Replacement Drum Pad Kit is available as part # 3313-P.

Two-Stage MORStak ^TM Drum Rackers

Place drums into and retrieve drums from drum rack up to 8.5' (2.59 m) high

• Two Stage
• Larger base for stability:
  L 60" x W 41"
  (152 x 104 cm)
• Service 4 drums wide
  in 99" (251 cm) wide drum rack

Single-Stage MORStak ^TM Drum Rackers

Place drums into and retrieve drums from drum rack up to 56" (142 cm) high

• Single Stage
• Stands only 78" (198 cm) tall
• Compact base:
  L 46" x W 36"
  (117 x 91 cm)
• Service 3 drums wide
  in 86" (218 cm) wide drum rack