Model 185A-GR Extra Heavy-Duty Kontrol-Karrier

Extra Heavy-Duty Below-Hook Drum Carrier

Options and Accessories

  FEATURES

Morse Model 185A-GR heavy-duty below-hook drum carrier allows you to lift, move and pour a drum weighing up to 2000 Lb., or a half-full* drum up to 1000 Lb. Standard Model 185A-GR heavy-duty below-hook drum carrier is designed to handle a 55-gallon steel drum with 22-1/2" outside diameter between the ribs.

• Capacity: 2000 Lb.

• Handles: 55-gallon steel drum

To load the drum lifter, simply move the drum holder against the drum and secure with the two load binders. Lift drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' chain loop.

IMPORTANT - It is critical to use the correct holder to lift your drum type and dimensions.

  ACCESSORIES

Model #

Description

Counterweight to level unit without drum

Diameter Adaptor for 19" diameter steel drum

  CUSTOM VERSIONS

Model #

Description of below-hook drum carrier

Longer arms on frame to provide clearance for taller drum, or to allow use of Morse Drum Cones for controlled pouring

HDPS Bracket at top and bottom of drum to handle plastic or steel drum

Frame and drum holder made of type 304 stainless steel

Painted with USDA approved white epoxy

Unit with "nested" lifting point to reduce required head room

Unit with wider frame and drum holder for larger diameter drum

Last Updated: 04/09/08

Heavy-Duty Below-Hook Drum Carrier. Model 185A-GR Extra Heavy-Duty Kontrol-Karrier - Options and Accessories.