Phone:  (315) 437 - 8475
Fax:  (315) 437 - 1029

You are here: Products : Below-Hook Drum Carriers : 1500 Lb. Capacity : Model # 185A-HD

RFQ - Model 185A-HD
Link to spec sheet
Link to parts diagram
Link to printer-friendly version of this page Printable Page

Heavy-Duty Below-Hook
Drum Carrier

Model 185A-HD
Heavy-Duty Kontrol-Karrier

Haevy-Duty Kontrol Karrier - Model 185A-HD
 

Recommended Options

MORStop Tilt-Brake
MORStop Tilt-Brake
Gear covers
Counterweight

Custom Versions

Longer arms for taller drum or to provide clearance for Drum Cones
Stainless steel version
Unit for smaller or larger drum
...and more

  FEATURES

Morse Model 185A-HD heavy-duty below-hook drum carrier allows you to lift, move and pour a drum weighing up to 1500 Lb., or a half-full* drum up to 800 Lb. Standard Model 185A-HD heavy-duty below-hook drum carrier is designed to handle a 55-gallon steel drum with 22-1/2" outside diameter between the ribs.
  • Capacity: 1500 Lb.

  • Handles: 55-gallon steel drum

  • Accepts Diameter Adaptors for smaller drum

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. Lift drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' chain loop.
 
Important noteIMPORTANT - It is critical to use the correct holder to lift your drum type and dimensions.

  OPTIONS and ACCESSORIES

 

Part #

Description

 

X04-185HD

Gear Covers factory installed on new unit
 
1051-P
Gear cover kit for field installation

Link to parts diagram

481-P
Counterweight to level the unit when suspended from hook
E14
Fiber Drum Strap to help prevent a fiber drum from slipping. Also for use with a straight walled steel drum.

Manual Tilt Control Options

1319-P
Standard Chain wheel Kit with 12' chain loop (6' drop)
 Link to parts diagram
1318-P
Chain wheel Kit with 20' chain loop (10' drop)
 Link to parts diagram
X01-185HD
MORStop Tilt-BrakeHand Crank with MORStop Tilt-Brake & Gear Covers
 Link to parts diagram
X02-185HD
Hand Crank and Gear Covers
 Link to parts diagram
X03-185HD
16" Diameter Hand Wheel and Gear Covers
 Link to parts diagram
3900i-P
MORStop Tilt-Brake factory installed
 Link to parts diagram
3900-P
MORStop Tilt-Brake for field installation
 Link to parts diagram

 

Diameter Adaptors

 
Model # Description  
55/30-22
Diameter Adaptor for 21.5" to 22" O.D. drum
 
55/30-20.5
Diameter Adaptor for 20" to 20.5" O.D. drum
 
55/30-19
Diameter Adaptor for 18.5" to 19" O.D. drum
 
55/30-17.5
Diameter Adaptor for 17" to 17.5" O.D. drum. Hold downs for drum up to 38" tall.
 
55/30-16
Diameter Adaptor for 15.5" to 16" O.D. drum. Hold downs for drum up to 38" tall.
 

55/30-14.5

Diameter Adaptor for 14” to 14.5” O.D. drum. Hold downs for drum up to 38" tall.
 
Measure the outside diameter (O.D.) half way down the drum, where the holder engages the drum.
Diameter = circumference divided by pi (3.1416).

  CUSTOM VERSIONS

Model #

Description of below-hook drum carrier

185S-HD

Longer arms on frame to provide clearance for taller drum, or to allow use of Morse Drum Cones for controlled pouring
HDPS Bracket at top and bottom of drum to handle plastic or steel drum
Frame and drum holder made of type 304 stainless steel
Painted with USDA approved white epoxy
Unit with "nested" lifting point to reduce required head room
Unit with wider frame and drum holder for larger diameter drum

55/30S

Custom Diameter Adaptor for other sizes or types of drum
 

* Half-Full Drum Rating

Half-Full Drum Rating for below-hook drum carrier is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Request For Quote on Morse Model 185A-HD

Request a quote from your local Morse dealer.

Your Morse Dealer

Your contact information. . .  * Required field

* Name
* Company
* Zip Code
Country (if not USA)
* Phone
* Email (We reply to EXACT Email you enter)
Options or
Accessories
Required
 
 
Last Updated: 04/09/08
 
Heavy-Duty Below-Hook Drum Carrier. Model 185A-HD Heavy-Duty Kontrol-Karrier - Options and Accessories.
Technical Support and Dealer Referrals
Monday through Friday 8:00 a.m. to 4:30 p.m. (EST)
Morse Mfg. Co., Inc.
727 West Manlius St., PO Box 518
East Syracuse, NY 13057 U.S.A.
Phone: (315) 437-8475
Fax: (315) 437-1029

| drum handling equipment | parts diagrams and operators manuals | catalog and spec sheets |
| request quote | contact Morse | custom drum handlers | company directory |
| warrantyprivacy policy | site map | drum handling videos |

Copyright © 1998-2008  -  Morse Mfg. Co., Inc. All rights reserved. "The Specialist In Drum Handling Equipment" ®