morse logo
The Specialist In Drum Handling Equipment                                   Phone: (315) 437 - 8475   Fax: (315) 437 - 1029

You are here: Below-Hook Drum Carriers : 800 Lb. Capacity : Model # 185A

Below-Hook Drum Carrier
Model 185A
Kontrol-Karrier

  • Capacity: 800 Lb. (363 kg)
  • Handle: 55-gallon (208 liter) steel drum 22" to 23.5" O.D.
    (56 to 59.7 cm O.D.)
  • MORcinch Options to handle almost any drum

Below-hook drum carrier - Model 185A

Model 185A Kontrol-Karrier
Below-Hook drum carrier

Recommended Options

Custom Versions

  • Longer arms for taller drum or Drum Cones
  • Stainless steel construction
  • Unit for smaller or larger drum
  • . . .and more

Features

Morse Model 185A below-hook drum carrier allows you to lift, move and pour a drum weighing up to 800 Lb. (363 kg), or a half-full* drum up to 500 Lb. (227 kg). Model 185A below-hook drum carrier is equipped with the MORcinch Drum Holder to handle a 55-gallon steel drum with 22" to 23.5" (56 to 59.7 cm) outside diameter between the ribs. It also accepts MORcinch Options to handle virtually any drum on the market.

It's a Cinch to handle almost any drum, with the
MORcinch Drum Handling System

Drum Handling System


  • Automatically cinches for 22" to 23.5" (56 to 59.7 cm) diameter steel or fiber drum
  • Accepts MORcinch Options to handle your plastic drum
  • Accepts Diameter Adaptors for your smaller drums
  • Flexible chain cover helps protect the drum sidewall
  • Includes safety covered gears for your protection
  • Has durable stress-relief weld joints for years of service

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. Lift the drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' (3.66 meter) chain loop.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop Tilt-Brake Option, braking is immediate and automatic. To have MORStop Tilt-Brake Option installed on your new Kontrol-Karrier, order Option # 3900i-P.

Important noteIMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

This below-hook drum lifter complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
MORcinch Options and Accessories
Part # Description Ship
Weight		 Ship
Dimensions
4560-P Top Rim Clamp for your 55-Gallon (208 liter) Rimmed Plastic or Fiber Drum 11 Lb.
(5 kg)		 L20" W9" H17"
(51 x 23 x 43 cm)
4556-P Bracket Assembly for Rimless Plastic Drum, or to more securely handle Fiber Drum 18 Lb.
(8 kg)		 L41" W15" H7"
(104 x 38 x 18 cm)
4623-P Counterweight to level the Kontrol-Karrier when suspended from hook 30 Lb.
(14 kg)		 L19" W4" H3"
(48 x 10 x 8 cm)
55/30 Series Diameter Adaptors for your smaller drums
Manual Tilt Control Options
X01-185 MORStop Tilt-BrakeHand Crank and MORStop Tilt-Brake
X02-185 Hand Crank
X03-185 Hand Wheel
3900i-P MORStop Tilt-BrakeMORStop Tilt-Brake factory installed
3900-P MORStop Tilt-BrakeMORStop Tilt-Brake for field installation on existing unit
 
Custom Below-Hook Drum Carriers
Model # Description
185S Longer arms on frame to provide clearance for taller drum, or to allow use of Morse Drum Cones for controlled pouring
Frame and drum holder made of type 304 stainless steel
Painted with USDA approved white epoxy
Unit with "nested" lifting point to reduce required head room
55/30S Custom Diameter Adaptor for other sizes or types of drum

* Half-Full Drum Rating

Half-full drum rating for below-hook drum carrier is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Last Updated: 07/23/10

Below-Hook Drum Carrier - Model 185A Kontrol-Karrier Options and Accessories