Heavy-Duty Below-Hook Drum Carrier
Model 185AM-HD
Heavy-Duty Kontrol-Karrier
with Spark Resistant Parts

• Capacity: 1500 Lb.
• Handle: 55-gallon steel drum 22" to 23.5" O.D.
• MORcinch Options to handle almost any drum
• Spark Resistant Parts

Model 185AM-HD
Heavy-Duty Kontrol-Karrier
Below-Hook drum carrier with spark resistant parts

Recommended Options

• MORStop Tilt-Brake

• Counterweight

Custom Versions

• Longer arms for taller drum or Drum Cones
• Stainless steel construction
• Unit for smaller or larger drum
• . . .and more

Features

Morse Model 185AM-HD heavy-duty below-hook drum carrier with spark resistant parts allows you to lift, move and pour a drum weighing up to 1500 Lb., or a half-full* drum up to 800 Lb. Model 185AM-HD heavy-duty below-hook drum carrier is equipped with the MORcinch Drum Holder to handle a 55-gallon steel drum with 22" to 23.5" outside diameter between the ribs. It also accepts MORcinch Options to handle virtually any drum on the market.

The KEY ADVANTAGE of Model 185AM-HD is that it has spark resistant parts intended to reduce the possibility of mechanical sparks as a possible source of ignition. They are not a substitute for grounding and bonding for preventing static electricity discharges. Metals such as Monel are used in the drum holder bands and at the lifting eye. Stainless steel chain is used instead of carbon alloy steel chain across the front of the drum. Pull chain for the tilt-control drive has brass chain substituted for the steel chain.

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. The standard drum tilt control is a chain wheel with 12' chain loop. Lift the drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop Tilt-Brake Option, braking is immediate and automatic. To have the MORStop Tilt-Brake Option installed on your new Kontrol-Karrier, order Option # 3900i-P.

IMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

This below-hook drum lifter complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test