 |
Drum Faucets
to control the flow of liquid from your drums
Drum faucets are available for standard 2" and 3/4"
bung sizes on 30 and 55-gallon steel drums. They allow you to stop,
start or adjust the flow while you empty drum. Order a drum faucet compatible with
the liquid you are
dispensing.
The bung on your plastic drum may be made with coarse
"buttress thread", but some drum manufacturers provide
adaptors to accept pipe threaded accessories. |
|
Models 68-20
and 68-75 Poly Drum Faucets |
|
Model 68-20 Poly Drum Faucet for 2" bung |
These drum faucets have all polyethylene construction. They are ideal for use with non-flammable, corrosive liquids which are
often packed in polyethylene drums.
-
Only a half turn to open or close drum faucet
-
Stays open to empty drum until manually closed
-
Model
68-20 Drum Faucet
-
For 2" bung with National Pipe
Thread (NPT)
-
For thick, viscous liquids
-
Model 68-75 Drum Faucet
-
For 3/4" pipe thread
size bung
-
For thin liquids
|
Self-Closing Drum Faucets |
|
NOTE: Do
NOT use Model 62-5 or 60D with "corrosives", acids, alkalines,
ketones, acetone, or chlorinated solvents. These liquids may cause
faucet to leak or come apart.
|
Model 62-5 Self-Closing Safety Drum Faucet
Self-closing drum faucet with a built-in flame arrestor for
dispensing flammable or non-flammable liquids.
-
Brass plated body
-
Steel handle may
be padlocked closed
-
Has 3/4" pipe thread to fit the smaller of the two bungs
in a typical steel drum
-
Do not use with corrosives, acids, highly alkaline
liquids or chlorinated solvents
|
Model 60D Self-Closing Drum Faucet (not shown)
Model 60D drum faucet is similar to Model 62-5, but for dispensing
non-flammable liquids ONLY. It does NOT have a flame arrestor.
-
Has natural zinc finish
-
Steel handle
may be padlocked closed
-
Has 3/4" pipe thread to fit the smaller of the two bungs in
a typical steel drum
|
"Molasses Gate" Drum Faucets |
|
 Model 65-20 Molasses Gate Drum Faucet |
Molasses Gates are for viscous liquids. They are made of gray iron
and have a brass sliding plate.
-
Model
#65-20 is for a 2" bung with National Pipe Thread (NPT)
-
Model #65-75 is for a 3/4"
bung
-
Not self-closing
-
Not for flammable liquids
-
Lockable with a pad lock
|
|
Last Updated:
04/09/08
Drum Faucets to control flow of liquid from
a drum. Stop, start or adjust the flow while you empty
drum.
|