morse logo
The Specialist In Drum Handling Equipment                                   Phone: (315) 437-8475   Fax: (315) 437-1029

Drum Mixers - Drum Mixing Equipment

Drum Mixers to blend the contents of a sealed drum

Morse Drum Rotators

Find the best drum mixer to blend contents right inside your sealed drum. Mix valuable ingredients back into suspension without the mess, clean-up, and potential hazards of insertion mixers. Choose the correct drum mixer for your drum and substances being mixed.

Drum Mixers - Drum Mixing Equipment
Drum Rollers Drum Tumblers
Hydra-Lift drum mixer

Hydra-Lift Drum Rollers
Hydra-Lift Drum Rotators have powered lift, and roll your closed drum on its side to mix the contents. The built-in hydraulic system lifts your upright drum from floor level and places it for rolling on the drum mixer. Option available to use as a plastic drum mixer.

 Tilt-To-Load Drum Tumblers

Tilt-To-Load Drum Tumblers
Tilt-To-Load Drum Tumblers have powered drum lift, and vigorous "corner-over-corner" drum mixing to thoroughly blend contents. Tilt-To-Load Drum Tumblers can rotate various sizes of steel, plastic or fiber drum.
Stationary drum mixer

Stationary Drum Rollers
Stationary Drum Rollers turn a drum on its side. There are Stationary Drum Roller models to mix the contents of one or two steel drums at a time. Options available to use as a plastic drum mixer.

 End-Over-End drum mixer

End-Over-End Drum Tumblers
Rotate drum end-over-end for an aggressive drum mixing action. There are End-Over-End Drum Tumblers for one or two 55-gallon (208 liter) steel drums at a time. Option available to use as a plastic drum mixer.
drum rollers

Portable Drum Rollers
Portable Drum Rollers roll your drum on its side to gently blend contents. Option available to use as a plastic drum mixer.

 5-gallon can tumbler to rotate 5-gallon pails end-over-end

5-Gallon Can Tumblers
Mix products inside your sealed 1 to 5 gallon cans or pails with these can rotators to reduce hazards and save clean-up. Single and double can mixers available.

Note: OSHA Requirement for enclosure with safety interlockInstall all Morse Rotators in accordance with local requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

All Morse drum mixing equipment is used to mix contents right inside a sealed drum.

Last Updated: 02/07/12